Before Unlocking The MRD-LX1 Network Unlock, Make Sure The Following Steps Are Performed:
Install MTK Driver Lasted
LINK – DOWNLOAD
Install libusb-win32-devel-filter Driver Lasted
LINK – DOWNLOAD
Login Username and Pass On Octoplus Huawei Tool
Welcome to Octoplus Huawei Software v.1.2.8
To enable ‘Manufacture’ mode dial
- for Qualcomm and Hisilicon based models: ##2846579##
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632##
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable ‘Fastboot’ mode
- Power off the phone. Remove SD and SIM cards
- Press ‘Vol-‘ and insert USB cable
- Wait until phone enters ‘Fastboot’ mode
To enable ‘Upgrade’ mode
- Power off the phone. Remove SD and SIM cards
- Press and hold ‘Vol-‘ and ‘Vol+’ keys and insert USB cable
- Wait until phone enters ‘Upgrade mode’
Found COM ports:
1: COM1 Communications Port
Job ID: 00000000022539C3
2022-01-22 08:38:15
Starting Direct Unlock
Selected phone model: MRD-LX1
Please, put your device in Factory mode (use “ON/OFF Factory Mode” option or Hardware Test Point) and insert USB cable
Detected MediaTek USB Port_V1633 port
Handshake started
Detecting Chip Version…
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Initializing remote service connection…
Downloading Authentication Data…
Downloading additional resources…
Sending Authentication Data…
Initializing remote service connection…
Downloading Download Agent data…
Downloading additional resources…
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent…
Found a suitable Download agent.
Sending Download Agent…
DA successfully sent
Synchronizing with DA…
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info…
Initializing remote service connection…
Downloading preloader data…
Downloading additional resources…
Initializing Memory Flash…
Initialization completed
Sending Loader…
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info…
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
IMEI A: 862243046492503
IMEI B: 862243046522515
Downloading additional resources…
Creating partition backup: MRD-LX1_protect1_2022-01-22_00-39-32.bin
Searching the unlock file…
Unlocking device…
Direct Unlock done.
Performed by 1.2.8 Software version.
Download Octoplus Huawei Tool Lasted
LINK – DOWNLOAD
MRD-LX2 MRD-L22 Emui 9.0.1.156 (C636E5R2P2) Android 9
LINK – DOWNLOAD
