Before JKM-LX2 Frp Lock Remove, Make Sure The Following Steps Are Performed:

Download Huawei Com1.0 Driver

LINK – DOWNLOAD

All Huawei Test Point

LINK – VIEW

Login Username and Pass On Octoplus Huawei Tool

Welcome to Octoplus Huawei Software v.‪1.2.7‬

To enable ‘Manufacture’ mode dial

  • for Qualcomm and Hisilicon based models: ##2846579##
    ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
  • for MTK based models: ##14789632##
    ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable ‘Fastboot’ mode

  1. Power off the phone. Remove SD and SIM cards
  2. Press ‘Vol-‘ and insert USB cable
  3. Wait until phone enters ‘Fastboot’ mode

To enable ‘Upgrade’ mode

  1. Power off the phone. Remove SD and SIM cards
  2. Press and hold ‘Vol-‘ and ‘Vol+’ keys and insert USB cable
  3. Wait until phone enters ‘Upgrade mode’

Job ID: 0000000001EC6C84
2021-12-06 04:23:20 GMT ————————————————-
Starting Reset FRP
Selected phone model: ‪JKM-LX2‬
Searching HUAWEI USB COM 1.0 port…
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN710_V1…
Initializing remote service connection…
Downloading additional resources…
Writing ‪XLOADER‬ partition…
Writing ‪UCE‬ partition…
Writing ‪FASTBOOT‬ partition…
Bootloader Update successfully
Rebooting to fastboot mode…
Searching Fastboot devices…
Found android device: 2DR4C18A29002049
Detected ‪Android Sooner Single ADB Interface‬ port

Device Model: ‪JKM-LX2‬
System: ‪JKM-LX2 9.1.0.340(C636E4R1P1)‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.340‬
Custom Version: ‪JKM-LX2-CUST 9.1.0.4(C636)‬
Preload Version: ‪JKM-LX2-PRELOAD 9.1.0.1(C636R1)‬
C_Version: ‪C636‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading additional resources…
Connecting to the credit server…
Username: cxYQKOIZma
Checking balance…
Your balance: 150 credits
Sending device information…
Sending firmware information…
To perform this operation you need to have: 0 credits.
Removing firmware protection…
Connecting to server…
Waiting for a response from the server…
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪JKM-LX2‬
System: ‪JKM-LX2 9.1.0.340(C636E4R1P1)‬
MEID: ‪00000000000000‬
IMEI A: ‪867743046754104‬
IMEI B: ‪867743046790116‬
S/N: ‪2DR4C18A29002049‬
Resetting FRP…
Writing FRP partition..
Rebooting device…

Reset FRP done.
Performed by ‪1.2.7‬ Software version.

Download Octoplus Huawei Tool Lasted

LINK – DOWNLOAD

JKM-LX2 9.0.1.162_Firmware

LINK – DOWNLOAD

By admin

Leave a Reply

Your email address will not be published.